ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Wikidata

ᥚᥪᥢᥴᥐᥦᥛᥴᥛᥪᥰ ᥗᥦᥛᥰᥙᥘᥥᥐᥳ[ᥖᥨᥭᥰ] [ᥗᥖᥰ] [ᥙᥪᥢᥰ] [ᥓᥣᥒᥰ]

For the module that should be used in |datax= parameters of infobox templates instead of this ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ, see Module:WikidataIB.

For a version of this template with an opt-in toggle, see {{WikidataOI}}.

Related pages
Template (talk) Template sandbox Template testcases Template doc Template subpages Module (talk) Module sandbox Module testcases Module doc Module subpages ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Endplainlist

This ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ is intended to fetch data from Wikidata with or without a link to the connected Wikipedia article and with many other features.

Usage

The general structure of a call to this ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ is as follows. Note that the basic structure consists of positional commands, flags and arguments, which all have a fixed position.

{{wikidata |command1|flag1a|flag1b|flag1c |command2|flag2a|flag2b|flag2c |flag0a|flag0b|flag0c |arg1|arg2|arg3}}

Use different commands to get different kinds of values from Wikidata. At least one command must be given and multiple commands can be combined into one call as shown above (in any order, more than two is also possible), but this only applies to commands from the claim class; calls containing a command from the general class cannot contain any other command. Each command can be followed by any number of command flags, which are optional and can be used to tweak the output generated by that command.

The commands and their flags may be followed by any number of configuration flags, which are also optional and affect the selection of data and the ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ's behaviour in general. The call is closed with the positional arguments, which may be required depending on the given command(s). Some named arguments (i.e. name-value pairs) also exist, as well as a set of named flags for advanced usage that can be used to change the way the fetched values are merged together into the output.

This ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ was designed to provide the basic needs for fetching data from Wikidata, but a lot can be achieved through different combinations of calls. For convenience, such combinations could be wrapped into new templates that serve a specific need. See also the section on common use cases below for some examples of useful "building blocks". Likewise, the functionality of this ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ can be extended by creating wrapper templates that use the main command provided by Module:Wd which is being used by this template (just like {{WikidataOI}} does).

Common use cases

Below follows a list of common use cases. In the future, shortcut commands may be implemented that are equivalent to these calls for convenience.

Call	Use case
{{wikidata|label|raw}}	Returns the Q-identifier of the Wikidata item connected to the current page (e.g. "Q55").
{{#if:{{wikidata|label|raw}}|...}}	Performs a check to determine if the current page has a Wikidata item. Note that this statement relies on a returned value that is either empty or non-empty and that the raw flag is important to include. Without this flag, an existing item's regular label would be returned which could be empty, giving an undesired result. If the flag is given on the other hand, then a non-empty Q-identifier is always returned if an item exists and an empty value if an item does not exist.

Commands

The commands (command1, command2, ...) determine what kind of values are returned. One call can only contain commands from a single class.

Claim class

The claim class commands can be combined, meaning that multiple commands of different types from this class can be given at one time (see above for usage).

Combine multiple commands into one call to this ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ, instead of making multiple calls to this ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ with one command each, to be sure that all the returned pieces of information belong to each other (see also the examples below).

Type	Command	Returns	Basic usage	Description
I	property	first match	{{wikidata|property|P1}}	Returns the requested property – or list of properties – from the current item-entity or from a given entity. This command can be given only once in one call.
	properties	all matches	{{wikidata|properties|P1}}
II	qualifier	first match	{{wikidata|qualifier|P1|P2}}	Returns the requested qualifier – or list of qualifiers – from the given property of the current item-entity or of a given entity. Unlike the other claim class commands, this command can be given multiple times to retrieve different qualifiers in one call.
	qualifiers	all matches	{{wikidata|qualifiers|P1|P2}}
III	reference	first match	{{wikidata|reference|P1}}	Returns a reference – or list of references – from the given property of the current item-entity or of a given entity. This command can be given only once in one call.
	references	all matches	{{wikidata|references|P1}}

General class

The general class commands cannot be combined.

Type	Command	Returns	Basic usage	Description
I	label		{{wikidata|label}}	Returns the label of the current item-entity or of a given entity if present.
II	title		{{wikidata|title}}	Returns the title of the page connected to the current item-entity or to a given item-entity if such page exists.
III	description		{{wikidata|description}}	Returns the description of the current item-entity or of a given entity if present.
IV	alias	first match	{{wikidata|alias}}	Returns an alias – or list of aliases – of the current item-entity or of a given entity if present.
	aliases	all matches	{{wikidata|aliases}}
V	badge	first match	{{wikidata|badge}}	Returns a badge – or list of badges – for the page connected to the current item-entity or to a given item-entity if such page exists.
	badges	all matches	{{wikidata|badges}}

Flags

The following (optional) flags are available which can be used to alter this ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ's behaviour. They must be given after the (first) command and before the positional arguments. For convenience, empty flags (i.e. ||) are allowed and will simply be ignored.

Command flags

These flags (flag1*, flag2*, ...) apply to the command that precedes them directly.

Flag	Description
raw	Returns the raw value if applicable. If this flag is used with item or property datatypes, then this will return the Q-identifier or P-identifier instead of the regular label. For quantity datatypes, this flag will strip off any units of measurement, unless the unit flag is also given in which case the raw unit of measurement (its Q-identifier) will be returned. If this flag is used with time datatypes, then the returned date will be in the format of yyyy-mm-dd (e.g. 1731-02-11), or yyyy-mm, or yyyy depending on the date's precision. Dates in the Julian calendar stored with a precision of days through millenniums will have /Julian attached to the output (e.g. 1731-02-11/Julian, which may be split off using the {{#titleparts}} parser function). If it is used with globe coordinate datatypes, then it replaces the various symbols with forward slashes in the returned value (e.g. 52/5/3/N/4/19/3/E, which may be split into parts using the {{#titleparts}} parser function).
linked	Creates a link to the Wikipedia article that is connected to the property or qualifier if it exists. Also links units of measurement that may be appended to values. If this parameter is omitted, then the plain property or qualifier value will be returned.
short	[EXPENSIVE] Returns the ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Wpl of any entity returned if they have one attached. If that is not the case, then the default behaviour of returning the entity's label will occur.
multilanguage	Returns monolingual text values in any available language, not just the current wiki's language.
unit	Returns only the unit of measurement for quantity datatypes.

Configuration flags

These flags (flag0*) are general configuration flags and can be given anywhere after the first command (but before the positional arguments).

	Flag	Description	Command class
Combination of:	preferred	Sets a rank constraint for the selected claim(s). The first three set the ranks for which claim(s) will be selected. They can optionally be followed by a + or a -, e.g. normal+ or preferred-, where the first selects claims with a 'normal' rank or higher and the second selects claims with a 'preferred' rank or lower. To get claims of all ranks, use preferred- or deprecated+. If the best flag is given additionally, then only the claims that have the highest rank amongst the selected claims will be returned. The default is normal+|best (so by default claims with a 'deprecated' rank are never returned). Output is always sorted from highest rank to lowest (regardless of any of these flags being set).	claim
	normal
	deprecated
	best
Combination of:	future	Sets a time constraint for the selected claim(s). Uses the claims' qualifiers of ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Wpl and ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Wpl to determine if the claim is valid for the selected time period(s). The default is future|current|former (so by default claims that are valid for any time period are returned), except when date= is given (see below) in which case the default is current.	claim
	current
	former
	mdy	Returns date values in month-day-year order instead of day-month-year order.	claim
	single	Returns only a single claim instead of multiple (if multiple claims match). Has no effect if the property/properties command is given, in which case this flag would be redundant.	claim
	sourced	Only returns claims that have at least one non-empty reference. (References having only ignored parameters are considered empty.)	claim
One of:	edit	Adds a clickable icon after the output that may be used by readers to edit the returned claim on Wikidata. If edit@end is used, then the icon will be placed at the end of the line for neat alignment in infoboxes.	claim, general
	edit@end

Arguments

The arguments determine the sources from which all the returned values are fetched.

Positional arguments

The following table shows the available positional arguments (arg*) in their fixed order. For each command, the applicable set of arguments is marked. If multiple commands are given, then the applicable set is the union of the individual sets. For instance, if the commands properties and qualifiers have been given, then at least both the arguments property_id and qualifier_id should be given as well.

More than one qualifier/qualifiers command can be given. The order in which these commands with their flags are given matches the order in which the respective qualifier_id arguments are given.

	(required)		(optional)	(optional)	(required)	(optional)	(required)	(required)
{{wikidata	commands		flags	entity_id	property_id	raw_value	qualifier_id	qualifier_id	}}
				label, title, description, alias/aliases, badge/badges
				property/properties
				reference/references
				qualifier/qualifiers
				qualifier/qualifiers (optional 2nd, 3rd, etc.)

Below follows a description of all positional arguments.

Argument	Description
entity_id (optional)	[EXPENSIVE] Q-identifier of the item-entity to be accessed (e.g. Q55), P-identifier (or an available alias) of the property-entity to be accessed preceded by the Property: prefix (e.g. Property:P38), or page title of the Wikipedia article whose connected item-entity is to be accessed preceded by :, a prefixed colon (e.g. :Netherlands). In case of the general class commands, the Property: prefix may be omitted for P-identifiers (e.g. P38). If this parameter is omitted, then the item-entity connected to the current page will be used (except when eid= or page= is given, see below). If this parameter is given, but empty (i.e. ||), then due to its position it will be interpreted as an empty flag and thus be ignored, giving the same result as if it were omitted. See also the named arguments eid= and page= below that can be used to give an entity-ID or page title too, but without the item-entity connected to the current page being used as a default.
property_id	P-identifier (or an available alias) of the property within the entity to be accessed, without the Property: prefix (e.g. P35).
raw_value (optional)	Either the Q-identifier equal to the property value (e.g. Q29574) or a literal value (i.e. string or quantity etc., no entity label) equal to the raw property value of the particular claim to be accessed. Dates as literal values must be formatted yyyy-mm-dd (e.g. 1731-02-11) for dates with a precision of days, yyyy-mm (e.g. 1731-02) for dates with a precision of months, and yyyy (e.g. 1731) for dates of lesser precision. Dates BCE require a minus sign in front of the year (e.g. -2950-01-31). Dates stored in the Julian calendar must have /Julian attached to the end (e.g. 1731-02-11/Julian). Decades like the 2010s must be given as 2010 (but the 2010s BCE as -2019), centuries like the 20th century as 1901 (but the 20th century BCE as -2000), and millenniums like the 3rd millennium as 2001 (but the 3rd millennium BCE as -3000). Globe coordinates as literal values must be formatted with forward slashes (i.e. /) between the parts and no symbols (e.g. 52/5/3/N/4/19/3/E) without any spaces or leading zeros. The special type 'no value' can be given by entering the empty string (i.e. ||) and the special type 'unknown value' can be given by entering a single underscore (i.e. |_|). To get a literal underscore, escape it by placing a backslash \ directly in front of it (i.e. \_); the same holds for a literal backslash (i.e. \\). To get a literal vertical bar |, use {{!}} or |. If this parameter is omitted, then all claims (matching any other constraints) within the property will be accessed.
qualifier_id	P-identifier (or an available alias) of the qualifier within the entity to be accessed, without the Property: prefix (e.g. P580).

Named arguments

Below follows a description of all named arguments, which are name-value pairs (i.e. |name=value). These are all optional and can be given anywhere inside the call.

Argument	Description	Command class
eid=	[EXPENSIVE] This argument can be used to give the Q-identifier (e.g. |eid=Q55) or P-identifier (or an available alias) of the entity to be accessed. It offers the same functionality as the positional argument entity_id, with one difference: if the argument is given but its value is left empty (i.e. |eid=), then no entity is accessed at all instead of the item-entity connected to the current page. This is useful in some cases where a variable entity-ID is expected, but where the item-entity connected to the current page should not be accessed as the default. Also, the Property: prefix may be omitted for P-identifiers (e.g. |eid=P38) for all commands. This argument only has effect if the positional argument entity_id is omitted.	claim, general
page=	[EXPENSIVE] This argument can be used to give the page title (e.g. |page=Netherlands) of the Wikipedia article whose connected item-entity is to be accessed. It behaves similar to the named argument eid= and can be used instead of the positional argument entity_id (note that no prefixed colon, :, is required). If the argument is given but its value is left empty (i.e. |page=), then no entity is accessed at all instead of the item-entity connected to the current page. This argument only has effect if the positional argument entity_id and the named argument eid= are omitted.	claim, general
date=	This argument can be used to set a particular date (e.g. |date=1731-02-11) relative to which claim matching using the future, current and former flags is done, instead of relative to today. It overrides the default of these flags to current so that by default only claims that were valid at the given date are returned (based on the claims' qualifiers of ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Wpl and ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Wpl). The date value must be formatted yyyy-mm-dd (e.g. 1731-02-11), yyyy-mm (e.g. 1731-02) or yyyy (e.g. 1731).	claim
<qualifier>=	The <qualifier> is a placeholder for a set of arguments that determine which claims should be accessed based on qualifier value, analogous to the pair of positional arguments property_id and raw_value (that determine access based on property value). As such, <qualifier> is any qualifier's P-identifier (or an available alias) without the Property: prefix (e.g. P518). Its value is either the Q-identifier equal to one of the qualifier values (e.g. Q27561) or a literal value (i.e. string or quantity etc., no entity label) equal to one of the raw qualifier values of the particular claim to be accessed. The value format is the same as for the positional argument raw_value. The special type 'no value' given by the empty string also matches the total absence within the claim of the particular qualifier. Example: |P518=Q27561 Multiple arguments of this type can be given to match multiple qualifier values simultaneously for each claim.	claim

Property aliases

Property aliases are other names for P-identifiers that can be used instead. The following property aliases (which are case-sensitive) are currently available:

Alias	translates to	P-identifier
coord	→	P625
image	→	P18
author	→	P50
authorNameString	→	P2093
publisher	→	P123
importedFrom	→	P143
wikimediaImportURL	→	P4656
statedIn	→	P248
pages	→	P304
language	→	P407
hasPart	→	P527
publicationDate	→	P577
startTime	→	P580
endTime	→	P582
chapter	→	P792
retrieved	→	P813
referenceURL	→	P854
sectionVerseOrParagraph	→	P958
archiveURL	→	P1065
title	→	P1476
formatterURL	→	P1630
quote	→	P1683
shortName	→	P1813
definingFormula	→	P2534
archiveDate	→	P2960
inferredFrom	→	P3452
typeOfReference	→	P3865
column	→	P3903
subjectNamedAs	→	P1810
wikidataProperty	→	P1687

References

When either the reference or the references command is used and a reference is encountered (in Wikidata), the module checks if the reference contains an ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property, ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property or ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property property. In the case one of these properties is present, the whole reference is ignored (i.e. it is treated as if it wasn't present).

Else, the module attempts to display the reference using the {{Cite web}} template. The reference has to have a ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property property. The below table shows the mapping of Wikidata properties to parameters of Cite web.

Wikidata property	Parameter of Cite web	Notes
ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property	archive-date
ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property	archive-url
ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property	author/authorN	N can be 1, 2, 3...
ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property
ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property	language	Ignored when the same as the local language.
ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property	pages
ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property	date
ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property	publisher
ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property	quote
ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property	url
ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property	access-date
ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property	at
ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property	website
ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property	title	Used only when ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property is not present, but a URL (either from ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property or from an external identifier, as described below) is, otherwise ignored.
ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property	title

The following properties are ignored: ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property, ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property.

If there is no ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property property present in the reference, but a property of the "External identifier" data type is present both in the reference and in the ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property of the item in ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property, a URL is generated from its content and is used in the same manner as a URL given in ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property.

If there is no ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property property, or the reference has unknown properties, the module attempts to display it using the {{Cite Q}} template. The ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property property is mandatory. The below table shows the mapping of properties to Cite Q parameters.

Wikidata property	Parameter of Cite Q	Notes
ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property	1	Value supplied to the parameter is raw, i.e. it is just the plain QID.
ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property	chapter
ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property	at
ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property	pages
ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property	date
ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property	access-date
ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property	section
ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property	title
any property of the "External identifier" data type	id	The label ("name") of the property is prepended before its content.

The properties listed under the first table (in this section) are also ignored when using Cite Q.

A reference could be displayed using Cite Q only if the reference has a ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Property property and has only properties listed in the table above. If neither Cite web nor Cite Q could be used to display a reference, an error message with an explanation is returned.

To fix this error, check if the reference has the required properties and doesn't have any unknown properties, as described above. The Wikidata help page on references can also be helpful when sourcing statements.

Advanced usage

The layout of the output from (a combination of) commands that have both a singular and a plural form (e.g. property/properties) can be customized by using a number of named flags, which are name-value pairs (i.e. |flag=value), that can be given anywhere inside the call. The table below shows the available named flags.

To insert a space at the beginning or end of a value, use an underscore _. To get a literal underscore, escape it by placing a backslash \ directly in front of it (i.e. \_); the same holds for a literal backslash (i.e. \\). To get a literal vertical bar |, use {{!}} or |.

Named flag	Default value	Default condition	Description
format=	%p[%s][%r]	if the property/properties command was given and the qualifier/qualifiers command was not given	The format of a single claim. The available parameters are as follows. Parameter Description %p The claim's property value applied by the property/properties command. %q1, %q2, %q3, ... The claim's qualifier value or list of qualifier values applied by the corresponding qualifier/qualifiers command. %q The collection of the qualifier values applied by each qualifier/qualifiers command (i.e. %q1 + %q2 + %q3 + ...). If only one qualifier/qualifiers command was given, then this parameter is equivalent to %q1. %r The claim's reference value or list of reference values applied by the reference/references command. %a The entity's alias applied by the alias/aliases command. %b The entity's page badge applied by the badge/badges command. %s The movable separator placeholder. This is a special parameter that is not applied by a command, but instead is filled automatically between each pair of claims, aliases or badges (if a list of claims, aliases or badges is returned). This is particularly handy in case a claim's reference is returned as well, since it allows the reference to be placed after the punctuation mark as prescribed by Wikipedia's manual of style. The default value is a comma (,) and can be overridden with the sep%s flag (see below). Optional parameters can be given by encapsulating them between square brackets: [...]. All content between the square brackets is only displayed if a value for each optional parameter that has been defined between the same brackets has been found. Optional content can also be nested. To use two opening square brackets that directly follow each other (i.e. [[), use {{!((}}. At least one parameter must be given that is not optional, while the %s parameter must always be defined as optional. To get a literal [, ], % or \, escape the character by placing a backslash \ directly in front of it (e.g. \%). See also the description directly above this table for more.
	%q[%s][%r]	if the property/properties command was not given and the qualifier/qualifiers command was given
	%r	if only the reference/references command was given
	%p[ <span style="font-size:85\%">(%q)</span>][%s][%r]	if the property/properties command was given and the qualifier/qualifiers command was given
	%a[%s]	if the alias/aliases command was given
	%b[%s]	if the badge/badges command was given
sep=	ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Dfn	default	The fixed separator between each pair of claims, aliases or badges.
	ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Dfn	if only the reference/references command was given without the raw flag
sep%s=	,	default	The movable separator between each pair of claims, aliases or badges. This will be the value of the %s parameter applied to all claims, aliases or badges, except for the last in the list (which can be set with the punc flag).
	;	if the property/properties command was not given and the qualifier/qualifiers command was given
sep%q1=, sep%q2=, sep%q3=, ...	ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Dfn	default	The separator between each pair of qualifiers of a single claim. These are the value separators for the %q1, %q2, %q3, ... parameters. If only one qualifier/qualifiers command was given, then the sep%q1 flag is equivalent to sep%q.
sep%q=	ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Dfn	if exactly one qualifier/qualifiers command was given	The separator between each set of qualifiers of a single claim. This is the value separator for the %q parameter. If only one qualifier/qualifiers command was given, then this flag is equivalent to sep%q1.
	ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Dfn	if more than one qualifier/qualifiers command was given
sep%r=	ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Dfn	default	The separator between each pair of references of a single claim. This is the value separator for the %r parameter.
	ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Dfn	if the raw flag was given for the reference/references command
punc=	ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Dfn	default	A punctuation mark placed at the end of the output. This will be placed on the %s parameter applied to the last claim (or alias or badge) in the list. This allows the last claim's references to be placed after the punctuation mark when the output is used as part of a sentence.

Examples

Parameters and output types	Example	Description
Q55 = "Netherlands", P395 = "licence plate code" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|property|Q55|P395}} ↓ NL	Gets a literal string value.
P395 = "licence plate code" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|property|P395}} ↓ NL	If the ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ is transcluded on the Netherlands page (which is linked to Q55), then the Q55 can be omitted.
Q55 = "Netherlands", P395 = "NL" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|property|eid=Q55|P395}} ↓ NL	An entity-ID can also be given using the eid= argument.
P395 = "NL" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|property|page=Netherlands|P395}} ↓ NL	A page title can be given instead of an entity-ID using the page= argument.
Q55 = "Netherlands", P395 = "licence plate code" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|property|edit|Q55|P395}} ↓ NL	Adds a clickable icon that may be used to edit the returned value on Wikidata.
Q55 = "Netherlands", P395 = "licence plate code" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|property|edit@end|Q55|P395}} ↓ NL	Places the edit icon at the end of the line.
Q55 = "Netherlands", P1082 = "population" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|property|normal+|Q55|P1082}} ↓ 17,590,672	Gets a single property value from claims with a 'normal' rank or higher.
Q55 = "Netherlands", P1082 = "population" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|properties|normal+|Q55|P1082}} ↓ 17,590,672, 10,026,773, 16,779,575, 16,829,289, 17,000,000, 17,081,507, 17,181,084, 17,282,163, 17,407,585	Gets multiple property values from claims with a 'normal' rank or higher.
Q55 = "Netherlands", P1082 = "population", P585 = "point in time" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]], [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|properties|qualifier|normal+|Q55|P1082|P585}} ↓ 17,590,672 (1 January 2022), 10,026,773 (1950), 16,779,575 (2013), 16,829,289 (26 August 2014), 17,000,000 (21 March 2016), 17,081,507 (1 January 2017), 17,181,084 (1 January 2018), 17,282,163 (1 January 2019), 17,407,585 (1 January 2020)	Gets a single qualifier value for each claim, additional to the property value.
Q55 = "Netherlands", P1082 = "population", P585 = "point in time" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]], [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]], [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|properties|qualifier|references|normal+|Q55|P1082|P585}} ↓ 17,590,672 (1 January 2022), 10,026,773 (1950), 16,779,575 (2013), 16,829,289 (26 August 2014), 17,000,000 (21 March 2016), 17,081,507 (1 January 2017), 17,181,084 (1 January 2018), 17,282,163 (1 January 2019), 17,407,585 (1 January 2020)	Gets references for each claim.
Q55 = "Netherlands", P1082 = "population" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]], [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	A total of {{wikidata|property|references|Q55|P1082}} people live in the Netherlands. ↓ A total of 17,590,672 people live in the Netherlands.	Gets a property with its references.
Q55 = "Netherlands", P1082 = "population" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]], [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	The Netherlands has a population of {{wikidata|property|references|Q55|P1082|punc=.}} ↓ The Netherlands has a population of 17,590,672.	Adds a punctuation mark at the end of the output, in front of the references.
Q55 = "Netherlands", P1082 = "population", P585 = "point in time" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]], [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]], [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	<ul>{{wikidata|properties|qualifier|references|normal+|Q55|P1082|P585|format=<li>%p[%r][<ul><li>%q</li></ul>]</li>}}</ul> ↓ 17,590,672 1 January 2022 10,026,773 1950 16,779,575 2013 16,829,289 26 August 2014 17,000,000 21 March 2016 17,081,507 1 January 2017 17,181,084 1 January 2018 17,282,163 1 January 2019 17,407,585 1 January 2020	Returns the output in a custom format.
Q55 = "Netherlands", P1082 = "population", P585 = "point in time" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|qualifier|normal+|Q55|P1082|P585}} ↓ 1 January 2022; 1950; 2013; 26 August 2014; 21 March 2016; 1 January 2017; 1 January 2018; 1 January 2019; 1 January 2020	Gets a single qualifier per claim, by default for multiple matching claims.
Q55 = "Netherlands", P1082 = "population", P585 = "point in time" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|qualifier|normal+|single|Q55|P1082|P585}} ↓ 1 January 2022	To get a single qualifier for only a single claim, give the single flag too so that only a single claim will be accessed.
Q55 = "Netherlands", P1082 = "population", P585 = "point in time" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|qualifier|Q55|P1082|10026773|P585}} ↓ 1950	Gets a qualifier from claims for which the (raw) property value matches a given literal value.
Q55 = "Netherlands", P1082 = "population", P585 = "point in time" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|qualifier|mdy|Q55|P1082|10026773|P585}} ↓ 1950	Gets dates in month-day-year order.
Q55 = "Netherlands", P1082 = "population", P585 = "point in time" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|qualifier|raw|Q55|P1082|10026773|P585}} ↓ 1950	Gets a raw date value.
Q55 = "Netherlands", P1082 = "population" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|references|Q55|P1082|10026773}} ↓	Gets the references from a particular claim.
Q55 = "Netherlands", P1082 = "population" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|references|raw|Q55|P1082|10026773}} ↓ CBS StatLine - Bevolking; kerncijfers. Statistics Netherlands.	Gets references from a particular claim in their raw form.
Q55 = "Netherlands", P1081 = "Human Development Index" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]], [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|properties|references|normal+|Q55|P1081}} ↓ 0.931, 0.787, 0.799, 0.829, 0.861, 0.877, 0.891, 0.909, 0.919, 0.920, 0.920, 0.922, 0.834, 0.835, 0.839, 0.864, 0.866, 0.865, 0.867, 0.870, 0.876, 0.879, 0.878, 0.883, 0.886, 0.897, 0.904, 0.906, 0.906, 0.910, 0.921, 0.921, 0.923, 0.924, 0.926, 0.928	Gets properties from each claim with any references they have.
Q55 = "Netherlands", P1081 = "Human Development Index" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]], [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|properties|references|normal+|sourced|Q55|P1081}} ↓ 0.931, 0.829, 0.861, 0.877, 0.891, 0.909, 0.919, 0.920, 0.920, 0.922, 0.834, 0.835, 0.839, 0.864, 0.866, 0.865, 0.867, 0.870, 0.876, 0.879, 0.878, 0.883, 0.886, 0.897, 0.904, 0.906, 0.906, 0.910, 0.921, 0.921, 0.923, 0.924, 0.926, 0.928	Only gets properties from claims that have at least one reference.
Q55 = "Netherlands", P2855 = "VAT rate", P518 = "applies to part" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|qualifier|Q55|P2855|P518}} ↓ food	Gets a single qualifier value (for each matching claim).
Q55 = "Netherlands", P2855 = "VAT rate", P518 = "applies to part" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|qualifiers|Q55|P2855|P518}} ↓ food, medication, assistive technology, magazine, book, art, antique, hairdresser, hotel, campsite, recreation, sport, water	Gets multiple qualifier values (for each matching claim).
Q55 = "Netherlands", P2855 = "VAT rate", P518 = "applies to part" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]], [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|properties|qualifiers|Q55|P2855|P518}} ↓ 21%, 6% (food, medication, assistive technology, magazine, book, art, antique, hairdresser, hotel, campsite, recreation, sport, water)	Gets multiple property values along with multiple qualifier values.
Q55 = "Netherlands", P2855 = "VAT rate", P518 = "applies to part" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]], [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|properties|qualifiers|Q55|P2855|P518|sep=_+_|sep%s=|sep%q=_/_}} ↓ 21% + 6% (food / medication / assistive technology / magazine / book / art / antique / hairdresser / hotel / campsite / recreation / sport / water)	Returns the output with custom separators.
Q55 = "Netherlands", P35 = "head of state", P580 = "start time", P582 = "end time" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]], [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|properties|qualifier|qualifier|normal+|Q55|P35|P580|P582}} ↓ Willem-Alexander of the Netherlands (30 April 2013), Beatrix of the Netherlands (30 April 1980; 30 April 2013), Juliana of the Netherlands (4 September 1948; 30 April 1980), Wilhelmina of the Netherlands (23 November 1890; 4 September 1948), Willem III of the Netherlands (17 March 1849; 23 November 1890), Willem II of the Netherlands (7 October 1840; 17 March 1849), William I of the Netherlands (16 March 1815; 7 October 1840)	Gets two different qualifier values for each claim.
Q55 = "Netherlands", P35 = "head of state", P580 = "start time", P582 = "end time" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]], [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|properties|qualifier|qualifier|normal+|Q55|P35|P580|P582|sep%q=_–_}} ↓ Willem-Alexander of the Netherlands (30 April 2013), Beatrix of the Netherlands (30 April 1980 – 30 April 2013), Juliana of the Netherlands (4 September 1948 – 30 April 1980), Wilhelmina of the Netherlands (23 November 1890 – 4 September 1948), Willem III of the Netherlands (17 March 1849 – 23 November 1890), Willem II of the Netherlands (7 October 1840 – 17 March 1849), William I of the Netherlands (16 March 1815 – 7 October 1840)	Returns the output with a custom separator.
Q55 = "Netherlands", P35 = "head of state", P580 = "start time", P582 = "end time" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]], [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|properties|qualifier|qualifier|normal+|Q55|P35|P580|P582|format=%p[ <span style="font-size:85\%">(%q1[ – %q2])</span>][%s][%r]}} ↓ Willem-Alexander of the Netherlands (30 April 2013), Beatrix of the Netherlands (30 April 1980 – 30 April 2013), Juliana of the Netherlands (4 September 1948 – 30 April 1980), Wilhelmina of the Netherlands (23 November 1890 – 4 September 1948), Willem III of the Netherlands (17 March 1849 – 23 November 1890), Willem II of the Netherlands (7 October 1840 – 17 March 1849), William I of the Netherlands (16 March 1815 – 7 October 1840)	Returns the output in a custom format instead of with a custom separator.
Q55 = "Netherlands", P35 = "head of state", P580 = "start time", P582 = "end time" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]], [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|properties|qualifier|qualifier|normal+|Q55|P35|P580|P582|format=%p[ <span style="font-size:85\%">([<![]--%q2]since [%q2--[]>]%q1[ – %q2])</span>][%s][%r]}} ↓ Willem-Alexander of the Netherlands (since 30 April 2013), Beatrix of the Netherlands (30 April 1980 – 30 April 2013), Juliana of the Netherlands (4 September 1948 – 30 April 1980), Wilhelmina of the Netherlands (23 November 1890 – 4 September 1948), Willem III of the Netherlands (17 March 1849 – 23 November 1890), Willem II of the Netherlands (7 October 1840 – 17 March 1849), William I of the Netherlands (16 March 1815 – 7 October 1840)	To add text only when a certain value is not present, like adding the word since if there is no end time, wrap it in between two optional blocks containing HTML comment tags and the relevant parameter (this also prevents the text from being added to the page source).
Q55 = "Netherlands", P35 = "head of state", Q29574 = "Beatrix of the Netherlands", P580 = "start time", P582 = "end time" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]], [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|properties|qualifier|raw|qualifier|normal+|Q55|P35|Q29574|P580|P582|format=%p[ <span style="font-size:85\%">(%q1[ – %q2])</span>][%s][%r]}} ↓ Beatrix of the Netherlands (1980-04-30 – 30 April 2013)	Gets a property with qualifiers from claims for which the property matches a given Q-identifier, with one of the qualifier values in its raw form.
Q55 = "Netherlands", P38 = "currency", P518 = "applies to part" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|properties|qualifiers|normal+|current|Q55|P38|P518}} ↓ euro (European Netherlands), United States dollar (Caribbean Netherlands)	Gets claims that are currently valid.
Q55 = "Netherlands", P38 = currency", P518 = "applies to part" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|properties|linked|qualifiers|normal+|current|Q55|P38|P518}} ↓ euro (European Netherlands), United States dollar (Caribbean Netherlands)	Gets claims with linked property values.
Q55 = "Netherlands", P38 = currency", P518 = "applies to part" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|properties|qualifiers|linked|normal+|current|Q55|P38|P518}} ↓ euro (European Netherlands), United States dollar (Caribbean Netherlands)	Gets claims with linked qualifier values.
Q55 = "Netherlands", P38 = currency", P518 = "applies to part" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|properties|linked|short|qualifiers|linked|normal+|current|Q55|P38|P518}} ↓ euro (European Netherlands), US dollar (Caribbean Netherlands)	Gets claims with linked property and qualifier values, with short property values wherever available.
Q55 = "Netherlands", P38 = currency", Q4917 = "United States dollar", P518 = "applies to part" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|qualifiers|normal+|current|Q55|P38|Q4917|P518}} ↓ Caribbean Netherlands	Gets qualifiers from claims for which the (raw) property value matches a given Q-identifier.
Q55 = "Netherlands", P38 = currency", P518 = "applies to part", Q27561 = "Caribbean Netherlands" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|properties|normal+|current|Q55|P38|P518=Q27561}} ↓ United States dollar	Gets properties from claims for which a (raw) qualifier value matches a given Q-identifier.
Q55 = "Netherlands", P38 = currency" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|properties|normal+|former|Q55|P38}} ↓ Dutch guilder	Gets claims that were valid in the past.
Q55 = "Netherlands", P38 = currency" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|properties|raw|normal+|former|Q55|P38}} ↓ Q788472	Gets raw property values.
Q55 = "Netherlands", P38 = currency" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|properties|raw|linked|normal+|former|Q55|P38}} ↓ Q788472	Gets raw property values that are linked to Wikidata.
Q55 = "Netherlands", P1549 = "demonym" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|property|Q55|P1549}} ↓ Dutch	Gets a monolingual text value in the current wiki's language.
Q55 = "Netherlands", P1549 = "demonym", P407 = "language of work or name", Q36846 = "Toki Pona" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|property|multilanguage|Q55|P1549|P407=Q36846}} ↓	Gets a monolingual text value in any available language.
Q55 = "Netherlands", P2884 = "mains voltage" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|property|Q55|P2884}} ↓ 230 volt	Gets a quantity value with its associated unit of measurement.
Q55 = "Netherlands", P2884 = "mains voltage" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|property|linked|Q55|P2884}} ↓ 230 volt	Gets a quantity value with a linked unit of measurement.
Q55 = "Netherlands", P2884 = "mains voltage" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|property|raw|Q55|P2884}} ↓ 230	Gets a raw quantity value.
Q55 = "Netherlands", P2884 = "mains voltage" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|property|unit|Q55|P2884}} ↓ volt	Gets only the unit of measurement.
Q55 = "Netherlands", P2884 = "mains voltage" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|property|unit|raw|Q55|P2884}} ↓ Q25250	Gets the raw unit of measurement.
Q55 = "Netherlands", P625 = "coordinate location" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|property|Q55|P625}} ↓ 52°19'N, 5°33'E	Gets a globe coordinate value.
Q55 = "Netherlands", P625 = "coordinate location" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|property|linked|Q55|P625}} ↓ 52°19'N, 5°33'E	Gets a linked globe coordinate value.
Q55 = "Netherlands", P625 = "coordinate location" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|property|raw|Q55|P625}} ↓ 52/19/N/5/33/E	Gets a raw globe coordinate value.
Q55 = "Netherlands", P625 = "coordinate location" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|property|Q55|coord}} ↓ 52°19'N, 5°33'E	A property alias can be used instead of the P-identifier.
Q55 = "Netherlands", P41 = "flag image" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|property|linked|Q55|P41}} ↓ Flag of the Netherlands.svg	Gets a media file name and links to it on Commons.
Q55 = "Netherlands", P41 = "flag image" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|property|raw|Q55|P41|format=\[\[File:%p {{!}} thumb {{!}} left\]\]}} ↓	A Commons media file can be included on the page as-is by omitting the linked and raw flags, but by using the raw flag it can be freely formatted.
Q55 = "Netherlands", P41 = "flag image" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|property|raw|date=1700-05-06|Q55|P41|format=\[\[File:%p {{!}} thumb {{!}} left\]\]}} ↓	To get the value of a property that was valid at a given time, the date= argument can be used.
Q55 = "Netherlands", P41 = "flag image" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|property|raw|date=1700-05-06|former|Q55|P41|format=\[\[File:%p {{!}} thumb {{!}} left\]\]}} ↓	The time constraint flags work relatively to the date value given for the date= argument.
Q915684 = "Lorentz–Lorenz equation", P2534 = "defining formula" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|property|Q915684|P2534}} ↓ ${\frac {n^{2}-1}{n^{2}+2}}={\frac {4\pi }{3}}N\alpha$	Gets a mathematical expression.
Q915684 = "Lorentz–Lorenz equation", P7235 = "in defining formula", P9758 = "symbol represents" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]], [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	<ul>{{wikidata|properties|qualifier|linked|Q915684|P7235|P9758|format=<li>%q[ (%p)]</li>}}</ul> ↓ refractive index ($n$) polarizability ($\alpha$) volumetric number density ($N$) pi ($\pi$)	Mathematical expressions can be combined with regular text as usual.
Q6256 = "country", P3896 = "geoshape" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|property|linked|Q6256|P3896}} ↓ Data:Naturalearthdata.com/admin-0-countries-no-antarctica.map	Gets a geographic shape data file name and links to it on Commons.
Q4917 = "United States dollar" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|label|Q4917}} ↓ United States dollar	Gets an item's label.
Q4917 = "United States dollar" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|label|short|linked|Q4917}} ↓ US dollar	Gets an item's short and linked label.
P38 = currency" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|label|P38}} ↓ currency	Gets a property's label.
P38 = currency" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|label|linked|P38}} ↓ currency	Gets a property's label that is linked to Wikidata.
Q776 = "Utrecht" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|label|Q776}} ↓ Utrecht	Gets an item's label.
Q776 = "Utrecht" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|label|linked|Q776}} ↓ Utrecht	Gets an item's linked label.
↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|label}} ↓ Utrecht	If the ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ is transcluded on the Utrecht (province) page (which is linked to Q776), then the Q776 can be omitted.
↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|label|raw}} ↓ Q776	If just the label command with the raw flag is given, then the Q-identifier of the item connected to the current page is returned.
↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|label|raw|linked}} ↓ Q776	If additionally the linked flag is given, then the Q-identifier of the item connected to the current page is linked to Wikidata.
Q776 = "Utrecht" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|title|Q776}} ↓ Utrecht (province)	Gets the title of the page on the current wiki that is linked to the given item.
Q776 = "Utrecht" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|title|linked|Q776}} ↓ Utrecht (province)	Gets the linked title of the page on the current wiki that is linked to the given item.
↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|title}} ↓ Utrecht (province)	If the ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ is transcluded on the Utrecht (province) page (which is linked to Q776), then the Q776 can be omitted.
Q55 = "Netherlands" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|description|Q55}} ↓ country in Northwestern Europe with territories in the Caribbean	Gets an item's description.
↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|description}} ↓ country in Northwestern Europe with territories in the Caribbean	If the ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ is transcluded on the Netherlands page (which is linked to Q55), then the Q55 can be omitted.
Q55 = "Netherlands" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|alias|Q55}} ↓ Holland	Gets one of an item's aliases.
Q55 = "Netherlands" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|aliases|Q55}} ↓ Holland, the Netherlands, NL, NED, Nederland, nl, 🇳🇱, Netherlands (after 1945)	Gets all of an item's aliases.
Q55 = "Netherlands" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|alias|linked|Q55}} ↓ Holland	Gets a linked alias from an item.
↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|alias}} ↓ Holland	If the ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ is transcluded on the Netherlands page (which is linked to Q55), then the Q55 can be omitted.
Q2 = "Earth" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|badges|Q2}} ↓ featured article badge	Gets the badges for the page on the current wiki that is linked to the given item.
Q2 = "Earth" ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|badges|raw|Q2}} ↓ Q17437796	Gets the raw badges for the page on the current wiki that is linked to the given item.
↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|badges}} ↓ featured article badge	If the ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ is transcluded on the Earth page (which is linked to Q2), then the Q2 can be omitted.
Q28865 = "Python", P548 = "version type", P348 = "software version identifier", ↓ [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]], [[[:ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Smallcaps]]]	{{wikidata|property|reference|edit|Q28865|P548=Q2804309|P348}} ↓ 3.11.3	Get Python's latest stable release version with its references. You may want to use P548=Q2122918 to get the latest preview release version.

Example references

TemplateData

This template fetches data from the centralized knowledge base Wikidata. To edit the data, click on "Wikidata item" in the left sidebar.

Template parameters[Edit template data]

Parameter		Description	Type	Status
No parameters specified

See also

• {{Sitelink}}, a template that can access other Wikipedia page titles
• Module:Wd, the source module that is called by this template
• {{Wdib}}, a wrapper template for the getValue call in Module:WikidataIB
• {{Wikidata entity link}} or redirect {{Q}}), to add a Wikidata entity link to a Wikipedia page
• {{Wikidata property link}} or redirect {{Property}}, to add a Wikidata property link to a Wikipedia page
• {{Wikidata property}}, to add a Wikidata property {{side box}} to a Wikipedia page or template documentation
• {{Uses Wikidata}}, to add a Wikidata property box to the documentation of a template or module
• {{Tracks Wikidata}}, to add a Wikidata property box to the documentation of a template, module, or category
• {{Wikidata editnotice}}, an editnotice for articles that make extensive use of this template
• {{Pageid to title}}, to get a page title using its local page id, rather than Wikidata

ᥚᥪᥢᥴᥐᥦᥛᥴᥛᥪᥰ ᥖᥤᥲᥚᥣᥭᥱᥢᥫᥴᥢᥭᥳ ᥙᥥᥢᥴ ᥟᥢᥴ ᥗᥩᥢᥴᥟᥩᥐᥱ ᥛᥣᥰᥖᥤᥲ ᥗᥦᥛᥰ ᥙᥣ ᥘᥥᥐᥳ:Wikidata/doc။ (ᥗᥖᥰ | ᥙᥪᥢᥰ)
ᥚᥧᥲᥛᥦᥰᥗᥖᥰᥑᥝᥴ ᥓᥣᥒᥲᥓᥣᥛᥰᥖᥨᥭᥰᥘᥭᥲ ᥖᥤᥲᥢᥬᥰ ᥢᥣᥲᥘᥤᥐᥲ sandbox (ᥔᥣᥒᥲ | mirror) ᥘᥦᥲ testcases (ᥔᥣᥒᥲ) ᥑᥩᥒᥴ ᥗᥦᥛᥰᥙᥘᥥᥐᥳ ᥟᥢᥴᥢᥭᥳ ᥘᥭᥲယူႇ။
ᥗᥦᥛᥴᥙᥫᥒᥴᥗᥣᥢᥲ ᥔᥬᥱᥓᥧᥰᥖᥤᥲ ᥢᥣᥲᥘᥤᥐᥲၽႄ /doc ။ ᥢᥣᥲᥘᥤᥐᥲၽႄ ᥑᥩᥒᥴ ᥗᥦᥛᥰᥙᥘᥥᥐᥳ ᥟᥢᥴᥢᥭᥳ.